Zanussi ZMD30Q - Manual (Page 13)

ZMD30Q
t
English
14
When your oven is plugged in for the first time or when power resumes after a power interruption, the display
window flash and show " ---- "
Example: To set 4.30
1. Touch the Clock button.
2. Set the time to " 4:00 " using the setting control knob
3. Touch the Clock Button
4. Set the time to " 4:30 " using the setting control knob
5. Touch the Clock button. (The Time will now be set)
NOTE : It is possible to display the current time even after starting the mode set, by pressing
theClock button (the time is displayed for 2 seconds).
This oven has a safety feature which prevents the accidental running of the oven by a child. After the lock has
been set, no part of the microwave oven will operate until the child lock feature has been cancelled.
To set:
1. Touch and hold the ’ Stop ’ button for 5 sec’s, a beep will be heard.
To cancel the child lock, simply touch and hold the ’ Stop ’ button for 5 sec’s, a beep will be heard.
There are two way to stop the oven whilst it is in use.
1. Press the Stop/Clear button
•
You may restart the oven by pressing the Start button
•
Pressing Stop/Clear again will reset the current programme
2. Open the door
•
You may restart the oven by closing the door and pressing the Start button
•
Pressing Stop/Clear again will cancel the current programme
At the end of each cooking the cooling fan will remain in operation until the oven door is opened
Setting the Clock
Child safety lock
To Stop the Oven