Features & controls – t ouch controls – Zephyr AK8200AS User Manual

Page 15

Advertising
background image

13

F

The standard baffle filters are required to be cleaned frequently and as recommended in order to maintain blower
efficiency. If improperly maintained, residue from cooking will sift through filters and cause damage to hood blowers and
other sensitive components; and possibly clog duct work and create a fire hazard.

Blower On/Off

Adjust 3 Speed Levels

5 Min Delay Off

Lights On/Dim/Off

Display

(Speed level, Delay Off Indicator)

1

2

3

4

5

Blower On/Off

By pressing , the blower is switched On and Off. When switched on, the blower turns on at the same
speed it was switched off at. When switched off the entire hood powers off, including the lights.

Speed Selection

The 3 speed levels are selected by pressing to decrease and to increase speed level. The
display indicates speed level selected. Pressing when the hood is off will also turn the blower on.

Delay Off

This is used for programmed shut down of blower and lights 5 minutes after the function is
activated. Press once, a dot displays in the lower right hand side of display indicating
the function is on. The hood will change to speed 1 and shut down after 5 minutes.

Lights On/Dim/Off

Switch lights On by pressing once, again to dim and again to switch Off.

Baffle Filter Clean Reminder
After every 30 hours of use the display will start flashing an reminding you to clean the baffle filters
from residue and possible clogs.

1

2

3

4

Display

Displays blower speed level, delay off status, filter clean reminder and clean air feature.

5

Clean Air Feature
Clean Air is a feature that turns the blower on every 4 hours for 10 minutes to remove stagnant air in
the kitchen. This feature is disabled by default and must be enabled by the user.

Features & Controls –

T

ouch Controls

Advertising