Zanussi MULTI BUILT-IN OVENS ZBC 741 - Manual (Page 12)

60
FO 0781 FO 0778
Allow the oven to cool down,
remove the drop collecting basin,
and unscrew the ring nuts of the
shelf supports. Remove the side panels. If necessary, unscrew the fixing
screw of the back panel and remove
it. Once the cleaning is carried out,
refit the parts following these
instructions backwards.
FO 0145 FO 0085 FO 0028
Fig. 8 Fig. 9
REMOVING THE SELF-CLEANING
PANELS
If the self-cleaning panels have been installed into the
oven, they should be removed from time to time to
allow a thorough cleaning.
THE HINGED GRILL
This model has been fitted with a hinged grill element,
to enable you to clean the roof of the oven easily.
Before proceeding, ensure the oven is isolated from
the electricity supply. Then undo the screw which holds
the grill in place. (see Fig. 8)
Gently pull the grill downward to allow access to the
oven roof. (see Fig. 9).
Clean the oven roof with a suitable cleaner and wipe
dry before replacing the hinged grill element.
Gently push up the grill element into place and firmly
screw into place the holding nut.
NOTE: Ensure the grill holding nut is firmly in place
to avoid the grill falling down during operation.