Maintenance and cleaning, Internal cleaning, Cleaning the central filter – Zanussi ZT 6905 User Manual

Page 15: Cleaning the large filter

Advertising
background image

8

Internal cleaning

Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.

We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A) and
should be removed by rinsing the filter under running
water.

To remove the drain filter
- simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its
original position until it engages.

Cleaning the large filter

(Every week)

If necessary clean the large filter (B) on both sides under
running water, using a brush.

To remove the large filter

1. Remove the spray arm by pulling it upwards on one

side.

2. Turn the column (C) anticlockwise by 90° and then

slide out the filter.

3. Once cleaned refit it following the above instructions in

reverse order.

4. Ensure the filter is in its original position, the handle of

the drain filter should be pointing towards the front of
the appliance.

The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the filters
will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.

A

MA04

MA19

C

90

°

B

MA05

MA20

MA18

MA21

Maintenance and cleaning

Advertising