Yamaha CRW4261t-NB - Manual (Page 16)

Chapter 2 - Installing the Yamaha CRW4261t Drive
10
AUDIO cable
8. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply
interface located on the rear panel of the CRW4261t drive.
The shape of the connector makes it impossible to reverse the connec-
tions.
If you have difficulty when inserting the connector, try wiggling the
connector left and right while inserting it.
To the CRW4261t
4-pin connector (large)
To the CDR100/102
(3-pin connector)
* Simultaneous use with the
CRW4261t is is not possible.
To the Sound Card (Sound Blaster compatible)
4-pin connector (small)
DC IN
PUT
1
5V +
12V +
G
R G
L
AUD
IO O UT
CSEL
SLAVE
MASTER
IDE
INTERF ACE
CONNECT
OR
1