ZyXEL Communications V300-T1 - Manual (Page 8)

V300 Quick Start Guide
7
6 Press Menu to configure the new IP address.
Enter the new IP address and press Menu
again.
7 The Static IP menu displays again. Scroll down
and set up the Gateway IP address, Subnet
Mask and 1st and 2nd DNS servers (if you have
information about only one DNS server, set up
the 1st DNS only).
"
Enter the information exactly as provided by your ISP.
You have finished setting up your network connection. Now go to section 2.2.
2.1.3 Get an IP Address Automatically
"
The V300 is set to get an IP address automatically by default.
1 If you have neither a username and password
nor an IP address to use, press 3 in the
Adv Setting > Network menu. DHCP
allows your V300 to get an IP address
automatically.
2 Press 1.
3 If the next screen displays Disable, press
Menu.
If the next screen displays Enable, your V300 is
already set to get an IP address automatically.
You do not need to change anything - go to
section 2.2.
4 Press Menu again in the screen that appears.
The V300 now tries to get an IP address
automatically.
You have finished setting up your network connection. Go to section 2.2.
2 Static IP:
0.0.0.0_
2 Static IP:
3 Gateway
1 Network
3 DHCP
3 DHCP
1 Active
1 Active
Disable
1 Active
Enable?