ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 292)

P-2602HWNLI User’s Guide
292 Chapter 21 Remote Management Configuration
Figure 151 Telnet Configuration on a TCP/IP Network
21.4 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 152 Remote Management: Telnet
The following table describes the labels in this screen.
Table 113 Remote Management: Telnet
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.