Zanussi DA 6153 - Manual (Page 4)

4
The cutlery basket is in two parts which can be separated to
give greater loading flexibility.
To separate the two parts,
slide them horizontally in
opposite directions and pull
them apart.
To reassemble, reverse the
procedure.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
Glasses with long stems can be placed upside down in the cup
racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the basket;
tilting them slightly forwards
and avoiding the front
positions near the door.
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the stops
(A) in their original position.
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
After loading your machine always close the door, as an
open door can be a hazard.
UI62
US47
US71
With upper basket raised 20 cm 31 cm
With upper basket lowered 24 cm 27 cm
Maximum height of the dishes in
upper basket lower basket
RC01
BRILLIANT
FOR A
SHINE
R I N S E
C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T
ACTION
N E W
DOUBL E
L I Q U I D G E L
P O W D E R
EASY
POURING PACK
For best results we recommend the use of Finish detergents, rinse aid and salt.
DE15