ZyXEL Communications NWD-270N User Manual
Page 55
Advertising
Appendix A Setting Up Your IP Address
NWD-270N User’s Guide
55
4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in
the TCP/IP tab.
5 For statically assigned settings, do the following:
• From the Configure IPv4 list, select Manually.
• In the IP Address field, type your IP address.
• In the Subnet mask field, type your subnet mask.
• In the Router address field, type the IP address of your NWD-270N.
Advertising