Yamaha RX-460 - Manual (Page 10)

1 1
Select the reception band (FM or AM) while watching
the display.
2 2
3 3
Tune to a desired station manually.
* To continue tuning search, press and hold the button.
1
Select the reception band (FM or AM) while watching
the display.
2
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
4
If the station where tuning search stopped is not the
desired one, follow step 3 again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
10
TUNING OPERATIONS
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
Display information ➀
Displays the band and frequency of the received station.
➁
Indicates the signal level of the received station.
➂ Illuminates when an FM stereo broadcast with sufficient
signal strength is received.
Note
If you tune to an FM station manually, it is received in
monaural mode only to increase the signal quality.
AUTOMATIC TUNING MANUAL TUNING
3,4, 3 3
2, 2 2 1, 1 1
FM/AM FM/AM
TUNING MODE
AUTO/MAN’L MONO
TUNING MODE
AUTO/MAN’L MONO
DOWN TUNING UP
DOWN TUNING UP
DOWN TUNING UP
STEREO
0 20 40 60 100 FM MHz
➀ ➂
➁
AUTO TUNING
STEREO
0 20 40 60 100
MHz
“AUTO TUNING”
goes off.
AM FM or AM FM or