Adjusting the speaker balance, Before you start adjusting, Using the test tone – Yamaha HTR-5440RDS User Manual

Page 21: Before you start adjusting 1, Press test. “test left” appears on the display, Set the volume at the minimum level, Turn the power on

Advertising
background image

19

English

B

ASIC OPERA

TION

AD
V

ANCED OPERA

TION

APPENDIX

INTR

ODUCTION

PREP

ARA

TION

ADJUSTING THE SPEAKER BALANCE

Using the Test Tone

The adjustment of each speaker sound output level should
be performed at your listening position with the remote
control.

1

Press TEST.
“TEST LEFT” appears on the display.

2

Turn up the volume.
You will hear a test tone (like pink noise) from each
speaker for about two seconds in following order: left
main speaker, center speaker, right main speaker, right
rear speaker and left rear speaker. The display changes
as shown below.

Notes

• If the test tone cannot be heard, turn down the volume, set the unit

in the standby mode and check the speaker connections.

• If the test tone cannot be heard from the center speaker, check the

setting of “CENTER SP” in the SET MENU.

This procedure lets you adjust the sound output level
balance between the main, center and rear speakers by using
the built-in test tone generator. When this adjustment is
performed, the sound output level heard at the listening
position will be the same from each speaker. This is
important for the best performance of the digital sound field
processor, the Dolby Pro Logic decoder, Dolby Digital
decoder and DTS decoder.

Note

• Since this unit cannot enter the test mode while headphones are

connected to this unit, be sure to unplug the headphones from the
PHONES jack when using the test tone.

Before You Start Adjusting

1

Set the volume at the
minimum level.

2

Turn the power on.

3

Press SPEAKERS A or B
to select the main
speakers to be used.
If you use two main speaker
systems, press both A and B.

4

Set BASS, TREBLE and BALANCE to the
center position.

SILENT

PHONES

VIDEO

L AUDIO R

6CH INPUT

INPUT MODE

INPUT

VOLUME

RDS MODE/FREQ

EON

PTY SEEK

MODE

START

TUNING

MODE

PRESET

/TUNING

FM/AM

MEMORY

EDIT

BASS

BALANCE

SPEAKERS

PROGRAM

PRESET/TUNING

EFFECT

A/B/C/D/E

A

B

OFF

ON

D I G I T A L

+

L

R

TREBLE

+

MAN'L/AUTO FM AUTO/MAN'L MONO

SURROUND

D I G I T A L

STANDBY

/ON

VIDEO AUX

1

2

4

3

VOLUME

STANDBY

/ON

SPEAKERS

A

B

OFF

ON

BASS

BALANCE

+

L

R

TREBLE

+

4

1,5

2

TEST
LEFT

TEST

RIGHT

TEST L SUR.

TEST R SUR.

TEST CENTER

0103V420RDS10-20_EN

2/12/1, 1:34 PM

19

Advertising