Yamaha CDX-596 - Manual (Page 12)

E-
8
BASIC OPERATION
This manual describes how to operate this unit by using the remote control.
To operate this unit from the front panel, use the corresponding buttons on the front panel.
1
Press POWER to turn on the power.
2
Press OPEN/CLOSE to open the disc tray, and load
a disc.
3
Press OPEN/CLOSE to close the disc tray.
4
Press (or ) to begin play.
Play will begin from the first track of the disc .
Display information
CDX-596
CDX-496, CDX-396
NATURAL SOUND COMPACT DISC PLAYER
POWER
1
OPEN/
CLOSE DIMMER SYNCHRO
PEAK SPACE
PROG CLEAR TAPE
2 3
RANDOM REPEAT
2, 3
4
POWER
OPEN/
CLOSE
OPEN/
CLOSE
1 Shows the track number selected or being played.
2 Displays the numbers that correspond to the numbers
of tracks (as high as number 20) on the disc. After each
track is played, its corresponding number disappears so
the number of remaining tracks (and their numbers) can
be seen at a glance.
3 CDX-596 and CDX-496 only
Shows the level of signals output into an amplifier or the
headphone level adjusted by pressing – OUTPUT
LEVEL +.
4 Shows the time displays. (Refer to “Changing displays”
on page 11.) 1 4 3
2
1 2 3
4
11 12
3 4 5 6 7 8 9 10
Label side up.
Disc tray