Lumex Syatems LF1050 - Manual (Page 8)

LF1050 Patient Lift Owner’s Manual 8
ASSEMBLY INSTRUCTIONS
Warning: The lift is heavy. Therefore, avoid
injury and DO NOT attempt to remove the
lift from the box without assistance.
1. Raise Mast from base
2. Engage the brakes. Remove the bolts
from the bottom of the mast and base.
Pull the Mast, Boom and Spreader Bar
to an upright position. Re-insert the
bolts into the holes at bottom of the
mast and tighten the nuts.
3. Attach the Control Box Hanging Bracket
to the Mast and tighten the nuts.
4. Place the control box inside the bracket.