ZyXEL Communications Prestige 128IMH - Manual (Page 63)

Prestige 128IMH ISDN Modem/ Router/Hub
Internet Access 3-7
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet
port.
Table 3-2 TCP/IP Ethernet Setup Menu Fields
Field Description Example
TCP/IP Setup
IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.1.1
(default)
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
255.255.255.0
RIP Direction Press the space bar to select the RIP direction from Both/In
Only/Out Only. Both
(default)
Version Press the space bar to select the RIP version from RIP-1/RIP-
2B/RIP-2M.
RIP-1
(default)
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [Esc] at any time to cancel.