Zoom 56K User Manual
Page 6
6
telephone connected to it.
5
Connect the power cube. Plug one end of the power cube into the
back of the faxmodem. Plug the other end into an electrical
outlet. Note: Use only the power cube that came with your
modem. Other power cubes may damage the faxmodem.
6
Turn the faxmodem on. Depending on the model, there will either
be a toggle switch on the back panel or a pushbutton on the front
panel. The modem will perform a brief self-test. Then the MR
(Modem Ready) light will go on.
7
For Windows NT 4.0, continue below.
For Windows 95/98/Me/2000 or later, turn to page 7.
Windows NT 4.0
1
Turn your computer back on. Insert the enclosed CD in your CD-
ROM drive and wait for it to auto-run.
If it doesn’t auto-run: Right-click on My Computer and then
click on Explore. In the left panel, click on the CD icon of the
drive that has your modem CD in it. In the right panel, double-
click on Setup or Setup.exe.
2
When the main interface appears, click on Install Drivers.
When the next screen appears, select the modem type you are
installing. Click Install Drivers.
When the Modem Installation Setup screen appears, click Next.
Follow the prompts. Click Finish.
3
Open Start | Settings | Control Panel; double-click on Modems.
Note: If the Modem Properties screen appears, click Add.
4
At the Install New Modem box, click Next. Let Windows NT
detect your modem and install the drivers.
5
Your modem will be detected as a “Standard Modem.” Click
Change.
The Install New Modem dialog box will appear. In the
Manufacturers box, scroll to your modem manufacturer’s name
and select it. In the Models box, scroll to your modem model
name and select it. (Refer to your modem package if you need
to.) Click OK.
6
In the Install New Modem screen, the correct modem will be
displayed. Fill in the Location Information screen if it appears.
Click Next.