Yamaha RX-V340 - Manual (Page 18)

16
Subwoofer
system
Main B speaker
Center
speaker
Right
Rear speaker
SUBWOOFER jack
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,
connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the
main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-
frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance
with your SPEAKER SET selections.
Notes
• The cut-off frequency of the SUBWOOFER jack is 90 Hz.
• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1
SPEAKER SET” item “1D BASS” on the set menu to MAIN.
• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control
(see “SETTING THE SPEAKER LEVELS” on page 46).
Right Left
Main A speaker
Right Left Left
MAIN SPEAKERS terminals
You can connect up to two speaker systems to these
terminals. When using only one speaker system, connect
it to either of the MAIN A or the MAIN B terminals.
REAR SPEAKERS terminals
A rear speaker system can be connected to these
terminals.
CENTER SPEAKER terminals
A center speaker can be connected to these terminals.
CONNECTIONS
The diagram shows the speaker layout in the listening
room.
AUDIO
L R
2
1
AUDIO VIDEO TUNER SPEAKERS
CLASS 2 WIRING L R
L R
L R
L R
CD DVD
AM
MAIN
A
MAIN
REAR
(SURROUND)
CENTER
B ANT
GND
FM
ANT
IN
(PLAY)
MAIN
DVD
CD
DIGITAL
INPUT
SUB
WOOFER CENTER
SUB
WOOFER
MONITOR
OUT
SURROUND OPTICAL
COAXIAL
OUT
(REC)
MD /CD-R
D-TV /CBL
V-AUX
IN
VCR
OUT
6CH INPUT OUTPUT
75 Ω UNBAL.
MAIN A OR B : 6 Ω MIN./SPEAKER
CENTER : 6 Ω MIN./SPEAKER
REAR : 6 Ω MIN./SPEAKER
3
6 5
2 1
4
1
2
4
3
6
5
04V340R_09-18_EN(3.2.25).p65 03.2.25, 7:57 PM 16