ZyXEL Communications 70 Series - Manual (Page 509)

ZyWALL 5/35/70 Series User’s Guide
509 Chapter 33 SMT Menu 1 - General Setup
Figure 269 Menu 1: General Setup (Bridge Mode)
The following table describes the fields not previously discussed (see Table 184 on page 508 ).
Edit Dynamic
DNS
Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes to
configure Menu 1.1: Configure Dynamic DNS discussed next.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Menu 1 - General Setup
System Name=
Domain Name=
Device Mode= Bridge Mode
IP Address= 192.168.1.1
Network Mask= 255.255.255.0
Gateway= 0.0.0.0
First System DNS Server
IP Address= 0.0.0.0
Second System DNS Server
IP Address= 0.0.0.0
Third System DNS Server
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 185 Menu 1: General Setup (Bridge Mode)
FIELD DESCRIPTION
Device Mode Press [SPACE BAR] and then [ENTER] to select Bridge Mode.
IP Address Enter the IP address of your ZyWALL in dotted decimal notation.
Network Mask Enter the subnet mask of your ZyWALL.
Gateway Enter the gateway IP address.
First System
DNS Server
Second System
DNS Server
Third System
DNS Server
Enter the DNS server's IP address(es) in the IP Address field(s) if you have the IP
address(es) of the DNS server(s).
Table 184 Menu 1: General Setup (Router Mode) (continued)
FIELD DESCRIPTION