Yamaha MS300 - Manual (Page 7)

7
Installation Examples
Speaker stand
Ceiling suspending with eye bolts
• To install the brackets and speaker, you need two
M8 x 16 bolts (sold separately).
BWS251-400 suspended speaker bracket
BCS251 ceiling speaker bracket
BBS251 baton speaker bracket
• Installation must be carried out by an installation specialist.
• Do not install two or more speakers on a single speaker stand or bracket. The speaker(s) may
fall, resulting in injury.
• Due to abrasion or corrosion, parts may deteriorate. To use the product safely, be sure to per-
form regular maintenance and inspections.
• Read the instruction manual for the speaker stand or speaker bracket when you install the
stand or bracket.
Knob
1 3 2 NEUTRIK 1 3 2 NEUTRIK
NEUTRIK 3 1 2
Speaker stand
160 cm or less
• Make sure the stand is
sufficiently durable to
support the weight of
the speaker.
• Set up the speaker
stand so that the height
will be 160 cm or less. If
the height exceeds
160 cm, the stand will
become unstable and
may fall.
• Place it on a level,
non-slippery, sturdy
surface.
• Spread the legs of the
stand to the maximum
extent.
• Be sure to fix the stand
so that it will not fall. (For
example, you could
place a sand bag on the
tripod legs to add weight
for stability.)
Knob (eye bolt M6)
• You can tilt or incline the speaker
using a knob (eye bolt M6).
M8 eye bolt
* M8 eye bolts are optional.
max. 20 degrees
235923
235923
Baton diameter
ш34 –ш51