Yamaha CRW2100SX - Manual (Page 19)

Setup Flowchart
Macintosh Users
10
STEP
1
STEP
1-1
STEP
1-2
STEP
2
STEP
3
STEP
4
STEP
5
YES
NO
Set up the CRW2100SX drive
Check that the CRW2100SX
drive is recognized correctly
Purchase a SCSI card
Install the SCSI card
Recommended model:
Adaptec PowerDomain 2930U (PCI)
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
Start using the CRW2100SX
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
1. Set the switches at the rear of the drive.
(P.12, 13)
2. Connect the SCSI and power cables,
then switch the drive on. (P.18-20)
Use the Apple System Profiler and check
that the drive is recognized correctly.
Does your Macintosh have
a built-in SCSI connector?
For details about how to install the
software, refer to the documentation
that came with it.
Install the CD writing
software