Zanussi NFRE400 - Manual

ZANUSSI
P R O F E S S I O N A L
ELECTRIC FRYERS - 15 LT
N 900
Model 200338
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
BASKET FOR 14/15 LT FRYERS 1 2
INCLUDED ACCESSORIES
Supply voltage 400 V, 3N, 50/60 400 V, 3N, 50/60
Net weight - kg. 50 86
installed-electric 10 20
Power - kW
Maximum Well Capacity -lt 13, 15 13, 15
Temperature limiter l l
Thermostatic l l
height 505 505
depth 380 380
width 240 240
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 900 900
width 400 800
External dimensions - mm
Power supply Electric Electric
NFRE400
200338
NFRE800
200339
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 15 litres fryers in electric version.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
�
Infrared high efficiency heating
elements.
�
The "V" shaped wells have the
heating elements attached to the
outside allowing an increased life of
the oil, greater productivity and an
easier cleaning.
�
Working temperature from 105ºC
to 185ºC.
� All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
�
Additonal overheat safety
thermostat.
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
�
Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
�
The special design of the control
knob system guarantees against
water infiltration.
� Feet in stainless steel 50 mm
adjustables in height.
�
Door with handles in stainless
steel.
�
All models can be installed on
cantilever system.
�
Main connections can be via the
base of the unit.
�
All models provided with service
duct to facilitate installation.