Yamaha HTR-5250 - Manual (Page 48)

44
Description of Each Position
■ TAPE/MD position
• The dark-shaded buttons do not function.
• If your component does not respond to any of the codes listed for the manufacturer, use the original remote control
supplied with your component.
PRESET REMOTE CONTROL
Select the TAPE/MD position.
r REC/PAUSE
This button gives a pause in recording on a
tape deck or MD recorder.
p PLAY
This button plays a tape or an MD.
b DIR A (TAPE)
This button selects the playing direction of
deck A.
SKIP– (MD)
This button skips to the beginning of the
previous track.
w REWIND (TAPE)
This button rewinds a tape.
SEARCH (MD)
This button initiates a backward search on the
track that is playing to find the point from
which you want to listen.
Numeric buttons (MD)
+10 (MD)
While the indicator lights up for about three
seconds after pressing DSP, this button turns
on or off the effect speakers (center and rear).
DECK A/B (TAPE)
This button selects deck A or B on a double-
cassette tape deck.
DISPLAY (MD)
e PAUSE (MD)
This button gives a pause in operation.
a DIR B (TAPE)
This button selects the playing direction of
deck B.
SKIP+ (MD)
This button skips to the beginning of the next
track.
s STOP
This button stops operation on a tape deck or
MD recorder.
f FAST FORWARD (TAPE)
This button winds a tape fast forward.
SEARCH (MD)
This button initiates a fast-forward search on
the track that is playing to find the point from
which you want to listen.
AV POWER
(TAPE) This button turns on the tape deck
that has a remote control with a power button
if you have set the code for another
manufacturer.
(MD) This button turns on the MD recorder
that has a remote control with a power button
if you have set the code for another
manufacturer.
0109V596(UCA)42-49_EN 3/1/0, 1:20 PM 44