Top cowling lock levers, Tilt support lever, Flushing device – Yamaha F100A User Manual

Page 36

Advertising
background image

2-11

E

F1008A

F1008B

EMU00163

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull
up the front and rear lock levers. Then lift
off the cowling. When replacing the cowl-
ing, check to be sure it fits properly in the
rubber seal. Then lock the cowling again
by moving the levers downward.

F1009

EMU00157

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.

000365

q

EMU01146

FLUSHING DEVICE

This device

1 is used to clean the cooling

water passages of the motor using a gar-
den hose and tap water.
NOTE:

Refer to “Cleaning Cooling-water Pas-
sages” in Chapter 4 for instructions on
usage.

67F-9-15-2 4/26/01 9:53 AM Page 12

Advertising
This manual is related to the following products: