Yamaha HTR-6130 - Manual (Page 48)

44
En
Set menu
Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
■ Signal information
SIGNAL INFO
Use this feature to check audio signal information (see page 32).
Use the remote control to access and adjust each
parameter.
y
You can change the set menu parameters while this unit is
reproducing sound.
1
Press 4
AMP and then press HMENU on
the remote control.
“BASIC SETUP” appears in the front panel display.
2
Press 7 k / n to select “MANUAL SETUP”.
3
Press 7
ENTER to enter “MANUAL SETUP”.
“1 SOUND MENU” appears in the front panel
display.
4
Press 7k / n repeatedly and then press
7
ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press 7k / n repeatedly.
5
Press 7k / n repeatedly and then press
7
ENTER to select and enter the desired
submenu.
• Repeat this step to navigate to and enter the items
you want to adjust.
• To return to the previous menu level, press
8RETURN.
6
Press 7k / n to select the desired parameter
and then 7l / h to change the parameter
value.
• Press 7h to increase the value.
• Press
7l to decrease the value.
7
Press H
MENU to exit from set menu.
Parameter Features Page
A)DISPLAY SET Adjusts the brightness of the front panel display. 50
B)MEMORY GUARD Locks sound field program parameters and other set menu settings. 50
C)AUDIO SELECT Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit. 50
D)PARAM. INI Sets all the parameters of the sound field programs to the initial factory settings. 50
E)BLUETOOTH Pairs the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 41). 50
Using set menu
BASIC SETUP
.
MANUAL SETUP
.
1 SOUND MENU
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
01EN_RX-V363_U.book Page 44 Thursday, January 31, 2008 3:52 PM