Zoom ACOUSTIC 504 II - Manual (Page 12)

ZOOM 504 II ACOUSTIC
23
Effect Parameters
Ef
fect
Parameters
Linking Effects
Linking
Ef
fects
22 ZOOM 504 II ACOUSTIC
The patches of the 504 II consist of ten effect parameters (including two
global parameters). By setting these parameters to the desired values,
you can control the sound of a patch.
It is also possible to switch individual parameters on and off, and to
program the expression pedal to adjust the value of a specific parameter.
The parameters TYPE, LIMIT/EDGE, LOW/BODY, HIGH/TOP have
separate settings for acoustic and for electric guitar. Depending on
whether ACOUSTIC or ELECTRIC is selected for the TYPE
parameter, the content of the other three parameters changes as follows.
This section describes all parameters and their setting values.
How to read the listing
De-AMP
This parameter serves for attenuating frequency bands that can
sound harsh when an acoustic guitar is reproduced via a guitar
amplifier. Choose the BRIGHT COMBO, COMBO, or STACK
DELAY+REVERB
This is an effect which combines delay (delay time 210 mS) and
reverb. Higher values result in deeper reverb effect and higher delay
sound mixing ratio.
PEDAL DELAY+REVERB
Allows using the expression pedal (FP01/FP02) connected to
the CONTROL IN jack to adjust the delay sound mixing balance
(reverb depth is fixed).
oF
Sets the DELAY&REVERB parameter to OFF.
DELAY&REVERB
Mixes a delayed component and reverb component to the
original sound, producing a feeling of depth and ambience.
[PLAY/EDIT] selector
Shows the position which is
used to call up the parameter.
Global parameter
Global parameters that apply to all patches are marked with a " ".
Display
Shows the setting range that is
available for that parameter.
Parameter on/off
Except for the TYPE parameter,
all parameters have an " "
setting which disables the
parameter. (The effect is the
same as when both [ ]/[ ]
foot switches are pressed
together in edit mode.)
Expression pedal
A pedal icon ( ) in the listing indicates
that the parameter can be controlled with
the expression pedal (FP01/FP02) when
the value is selected.
If there is no parameter marked with a
pedal icon selected in the entire
patch, the expression pedal operates
as a volume pedal.
Global parameters
Effect parameters
LIMITER
EDGE
LOW
BODY
HIGH
TOP
RICH CHORUS
LIGHT CHORUS
12-STRING
DOUBLING
TOUCH
EMPHASIZER
DRY MIX
WAH
AIR LARGE
SMALL
DELAY
DELAY+REVERB
BRIGHT COMBO
COMBO
STACK
AUTO
MANUAL
ELECTRIC
ACOUSTIC
FLAT
NATURAL
MILD
RHYTHM
BRIGHT
THRU
NORMAL
JUMBO
PIEZO
GUT
TYPE AIR EFFECT
De-AMP
PATCH LEVEL
F.B.SUPPRESSOR
DLY&REV LIMIT/EDGE LOW/BODY HIGH/TOP
When ACOUSTIC
is selected
TYPE, LIMIT/EDGE, LOW/BODY, HIGH/TOP
function as a "preamp" that adjusts the
character and dynamics of the acoustic guitar
sound.
When ELECTRIC
is selected
TYPE, LIMIT/EDGE, LOW/BODY, HIGH/TOP
function as a "simulator" for changing the
sound of an electric guitar into that of an
acoustic instrument.
LIMITER
EDGE
LOW
BODY
HIGH
TOP ELECTRIC
ACOUSTIC
FLAT
NATURAL
MILD
RHYTHM
BRIGHT
THRU
NORMAL
JUMBO
PIEZO
GUT
TYPE