Table 9 screens summary – ZyXEL Communications P-334WHD User Manual

Page 46

Advertising
background image

P-334WHD User’s Guide

46

Chapter 2 Introducing the Web Configurator

Table Key: An O in a mode’s column shows that the device mode has the specified feature.
The information in this table was correct at the time of writing, although it may be subject to
change.

The following table describes the sub-menus.

Bandwidth Management

O

O

Remote Management

O

O

UPnP

O

O

Logs

O

O

O

Configuration Mode

O

O

O

Operating Mode

O

O

O

Table 8 Router, AP and WiFi WAN Router Mode Features Comparison

FEATURE

ROUTER MODE

ACCESS POINT
MODE

WIFI WAN ROUTER
MODE

Table 9 Screens Summary

LINK

TAB

FUNCTION

Status

This screen shows the ZyXEL Device’s general device, system and

interface status information. Use this screen to access the wizard, and

summary statistics tables.

Network

Wireless LAN

General

Use this screen to configure wireless LAN.

MAC Filter

Use the MAC filter screen to configure the ZyXEL Device to block access to

devices or block the devices from accessing the ZyXEL Device.

Advanced

This screen allows you to configure advanced wireless settings.

WAN

Broadband

Connection

This screen allows you to configure ISP parameters, WAN IP address

assignment, DNS servers and the WAN MAC address.

Modem Dialup

This screen allows you to configure the WAN dial-up connection.

Advanced

Use this screen to configure other advanced properties.

WiFi WAN

Broadband

Connection

This screen allows you to configure ISP parameters, WiFi WAN IP address

assignment, DNS servers and the WiFi WAN MAC address.

WiFi

Use this screen to enable WLAN, scan for and connect to a wireless

network and configure wireless security settings.

Advanced

Use this screen to configure other advanced properties.

LAN

IP

Use this screen to configure LAN IP address and subnet mask.

IP Alias

Use this screen to partition your LAN interface into subnets.

Advanced

Use this screen to enable other advanced properties.

DHCP Server

General

Use this screen to enable the ZyXEL Device’s DHCP server.

Advanced

Use this screen to assign IP addresses to specific individual computers

based on their MAC addresses and to have DNS servers assigned by the

DHCP server.

Client List

Use this screen to view current DHCP client information and to always

assign an IP address to a MAC address (and host name).

Advertising