Loading documents to scan – Xerox 150 User Manual
Page 23
Scanning
18
DocuMate 150 Scanner User’s Guide
Loading Documents to Scan
When you press the Scan button, documents are scanned using the scan
settings indicated by the LED number. The scanned images are then sent
to a software application on your computer.
1.
Adjust the paper guide for the width of paper, and make sure the input
and output trays are fully extended.
2.
Load the documents face down
with the top of the pages inserted into
the Automatic Document Feeder.
NOTE:
Always remove any staples or paper clips from documents
before inserting them into the scanner’s Automatic Document Feeder.
Staples and paper clips can jam the feed mechanism and scratch the
internal components. Also remove any labels, stickers, or Post-It™
notes that may come off during the scanning process and get stuck in
the scanner. Misuse as described here will void your scanner’s
warranty.