Xerox KS-801 - Manual (Page 16)

-16-
3.3 Fast Ethernet Fiber Slot
The switch provides one fast Ethernet fiber slot. It can accommodate one
optional fiber module for your fiber connection. Depending on the fiber
interface and the types of fiber cables, the following fiber modules are
available for selection:
Module Connector type Fiber cable Maximum length
800-T ST MM* 2 Km
800-C SC MM 2 Km
800-SA SC SM * 15 Km
800-S3 SC SM 30 Km
800-S5 SC SM 50 Km
800-JM MT-RJ MM 2 Km
800-JS MT-RJ SM 15 Km
800-VM VF-45 MM 2 Km
* MM : Multimode fiber cable, SM : Single mode fiber cable
Switched port #9 supports two types of connections. One type is UTP
connection through Port 9X. The other is fiber connection through slot
FIBER respectively. Both types of connections can not be used at the
same time. Each fiber module provides optional jumpers to enable or
disable fiber connection.