Yamaha MSP5A - Manual (Page 6)

6
MSP5A—Owner’s manual
Specifications
General specifications
Type ....................................... Bi-Amp 2-way Bass Reflex
Powered Speaker
Crossover Frequency .............. 2.5 kHz
Frequency Range .................... 50 Hz–40 kHz
Maximum Output Level.......... 101 dB (1 m on Axis)
Dimensiones (W
× H × D) ...... 169 Ч 279 Ч 222 mm
Weight ................................... 7.5 kg
Speaker unit
Speaker Unit
LF: 12 cm cone (4 Ω, magnetic shielded)
HF: 2.5 cm titanium dome (6 Ω, magnetic shielded)
Enclosure
Type: Bass Reflex
Volume: 6.3
Amp.unit
Maximum Output Power
LF: 40 W at 400 Hz, THD= 0.02%, RL=4 Ω
HF: 27 W at 10 kHz, THD= 0.02%, RL=6 Ω
Input Sensitivity/Impedance
Line 1: +4 dB/10 k Ω (XLR Blanced)
Line 2: –10 dB/10 k Ω (phone Unblanced)
Signal to Noise Ratio .............. ≥100 dB (A Weighted)
Controls
TRIM switch
LOW: 4 positions
(+1.5 dB, 0 dB, –1.5 dB, –3 dB at 60 Hz)
HIGH: 3 positions
(+1.5 dB, 0 dB, –1.5 dB at 15 kHz)
Power switch: On/Off
VOL control
Power Indicator ............Green LED
Power Requirement
USA and Canada: AC120 V, 60 Hz
Europe: AC230 V, 50 Hz
China: AC220V, 50Hz
Korea: AC220V, 60Hz
Others: AC240 V, 50 Hz
Power Consumption .....60 W
Accessories...................Non-skid pads
× 2, Owner’s manual
Specifications and descriptions in this owner’s
manual are for information purposes only. Yamaha
Corp. reserves the right to change or modify
products or specifications at any time without prior
notice. Since specifications, equipment or options
may not be the same in every locale, please check
with your Yamaha dealer.
Dimensions
W: 169
H: 279
171.5
D: 222
20*
7 43.5
110*
60
30
2-M5 (For mounting bracket)
Unit: mm
* Non-skid pad positions.