Yamaha CDR-S1000 - Manual (Page 16)

E-13
RECORDING FUNCTIONS
This is a recording mode suitable for compiling single
tracks from different audio sources. A new track marker is
automatically placed at the start of the track.
Synchronized recording
of a single track
NATURAL SOUND CD RECORDER CDR-S1000
POWER FINALIZE ERASE DISPLAY
TRACK NO. EFFECT REC MODE
OPEN/CLOSE
CD DIRECT REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
0 10
OPTICAL COAXIAL ANALOG
REC MUTE
/ / /
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH SKIP
ERASE REC REC MUTE
1 2 3
4 5 6
7 8 9
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE DIMMER DISPLAY
OPEN/
CLOSE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT REC ALL
AUTO
SYNC TOC R
dB
L
S F
32 44 48 .1
– 60 30 10 6 4 2 1 0 OVER 00 – – – – – – –
INPUT REC MODE
&
REC MODE
STOP &
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT REC ALL
AUTO
SYNC TOC X2 X4 R
dB
L
S F
32 44 48 .1
– 60 30 10 6 4 2 1 0 OVER 00 – – – – – – –
REC
REC
4
Adjust the recording level as described on page 17.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5
Ensure that the source is in pause or stop mode, as
synchronized recording cannot be started if the
source is playing.
• Confirm the correct track is selected before
proceeding to the next step.
6
Press REC MODE once.
• The SINGLE and SYNC indicators light in the
display.
7
Start playing the source.
• The unit starts recording automatically when it
detects an audio signal.
• When the track being recorded ends, “Standby”
blinks in the display while information is being
written to the PMA (Program Memory Area) and
the unit is put in the record pause mode.
8
To record another track, repeat steps 5, 6, and 7.
9
After recording is complete, press & ( STOP & on the
remote) to cancel recording and put the unit in the
stop mode.
When you are finished recording, follow the
finalization procedure described on page 20.
1
Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2
Press REC .
• This unit enters record pause mode.
3
Set INPUT on the front panel to the appropriate input
to be used for recording.