Yamaha AVX-S30 - Manual (Page 20)

ADDITIONAL INFORMATION
18
You can check the volume level or audio input signal types on the Status indicator.
■ Volume level
Volume level of each speaker channel (difference based on the system volume, unit: dB)
■ Input signal
This unit automatically handles input signals. You cannot switch the signal type manually. For details on each signal
type, refer to “Glossary” (page 21).
y
The status indicator “AUTO” turns off when one of the CINEMA DSP programs or Dolby Pro Logic modes is selected.
ADDITIONAL INFORMATION
Status Indicator
Status
indicator
(green)
Front (L, R) –6 –5 –4 –3 –2 –1.5 –1 –0.5 ±0
Center,
Surround
(L, R)
–4 –3.5 –3 –2.5 –2 –1.5 –1 –0.5 ±0
Subwoofer –8 –7 –6 –5 –4 –3 –2 –1 ±0
Status
indicator
(green)
Front (L, R) – – – – – – – –
Center,
Surround
(L, R)
+0.5 +1 +1.5 +2 +2.5 +3 +3.5 +4
Subwoofer +1 +2 +3 +4 +5 +6 +7 +8
1
-8
1
-8
2
-6
2
-6
2
-6
3
-4
3
-4
3
-4
4
-2
4
-2
4
-2
5
0
5
0
5
0 +2
6
+2
6
+2
6
+4
7
+4
7
+4
7
+6
8
+6
8
+6
8
+8
9
+8
9
AUTO DTS qDigital
2 3 4 5 6
AUTO DTS qDigital
2 3 4 5 6
AUTO DTS qDigital
2 3 4 5 6
When a Dolby Digital signal is input
When a DTS signal is input
When an analog signal or PCM signal is input