Table 86 acl setting notes table 87 icmp notes – ZyXEL Communications NBG-318S User Manual
Page 196
Chapter 19 Logs
NBG-318S User’s Guide
196
Local User Database does not
support authentication method.
A user tried to use an authentication method that the
local user database does not support (it only supports
EAP-MD5).
No response from RADIUS. Pls
check RADIUS Server.
There is no response message from the RADIUS server,
please check the RADIUS server.
Use Local User Database to
authenticate user.
The local user database is operating as the
authentication server.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
server.
No Server to authenticate user.
There is no authentication server to authenticate a user.
Local User Database does not
find user`s credential.
A user was not authenticated by the local user database
because the user is not listed in the local user database.
Table 86 ACL Setting Notes
PACKET DIRECTION
DIRECTION
DESCRIPTION
(L to W)
LAN to WAN
ACL set for packets traveling from the LAN to the WAN.
(W to L)
WAN to LAN
ACL set for packets traveling from the WAN to the LAN.
(L to L/P)
LAN to LAN/NBG-
318S
ACL set for packets traveling from the LAN to the LAN or
the NBG-318S.
(W to W/P)
WAN to WAN/
NBG-318S
ACL set for packets traveling from the WAN to the WAN
or the NBG-318S.
Table 87 ICMP Notes
TYPE
CODE
DESCRIPTION
0
Echo Reply
0
Echo reply message
3
Destination Unreachable
0
Net unreachable
1
Host unreachable
2
Protocol unreachable
3
Port unreachable
4
A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
5
Source route failed
4
Source Quench
0
A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
5
Redirect
0
Redirect datagrams for the Network
1
Redirect datagrams for the Host
Table 85 802.1X Logs (continued)
LOG MESSAGE
DESCRIPTION