Yamaha CDX-9 - Manual (Page 12)

12
1
Stop the unit.
2
3
Program a desired track by pressing the corresponding
numeric button.
* Repeat this operation to program more tracks. You can
select the same track again.
4
PROGRAM PLAY
You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 25 tracks can be
programmed in sequence.
Display information during programming
1 Shows the program number for the track to be
programmed next.
2 Shows the selected track number.
3 Shows the total time of the tracks currently programmed.
* If the total time becomes 100 minutes or more, the highest
position of a figure will not be displayed.
Notes
• In step 2, if “P-01” does not appear in the display, press the
TIME display mode-select button.
• If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total time of the programmed tracks. To return to
the previous display, press the TIME display mode-select
button once again.
• The SKIP ( and ) button can be used during
playing, but only within the range of the programmed tracks.
• The SEARCH ( and ) button can be used during
playing to search all tracks, including unprogrammed tracks.
• The PAUSE mode can also be programmed (one time only),
if so desired, by pressing the TAPE button instead of a
numeric button. (In this case, “
B” is illuminated on the
display.)
• If, for a compact disc with 25 tracks or more, track number
25 or higher is programmed, the total time will disappear
from the display.
1
PROGRAM
TOTAL
PROGRAM
TOTAL
3 2
STOP
PROG
6
PLAY
PROGRAM
TOTAL
2 1
SPACE TAPE PEAK
SYNCHRO
3 INDEX
PROG CLEAR
OPEN/
CLOSE
8 7 9 0
5 4 6 + I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP
STOP PAUSE PLAY
2
4
3
1
Flashes.