Receiver connections, Subwoofer connection – Yamaha NS-FP9500 User Manual

Page 2

Advertising
background image

10

11

12

13

15

Connect Main Speakers Unplug receiver before proceeding. Identify

“Front” or “Main” speaker terminals on receiver. Connect left main speaker
wire to left main terminals and right main speaker wires to right main
terminals as shown. Positive (+) side of the wire with white stripe attaches
to red terminal. Negative (-) side attaches to black terminal.

Receiver Connections

NOTE

Receiver shown is for illustration purposes, yours may differ.

CAUTION

Receiver must not be plugged in while connecting speakers.

Connect Rear Speakers Identify “Rear” or “Surround” speaker

terminals on receiver. Connect left rear speaker wire to left rear terminals
and right rear speaker wire to rear right terminals as shown. Positive (+)
side of the wire with white stripe attaches to red terminal. Negative (-)
side attaches to black terminal.

Connect Center Speaker Identify Center speaker terminals on receiver.

Connect center speaker wire to center terminals as shown. Positive (+) side
of the wire with white stripe attaches to red terminal. Negative (-) side
attaches to black terminal.

Connect Rear Center Speaker Identify Rear Center speaker terminals

on receiver. Connect rear center speaker wire to rear center terminals as
shown. Positive (+) side of the wire with white stripe attaches to red
terminal. Negative (-) side attaches to black terminal.

Subwoofer Connection

16

Enjoy the Home Theater Experience We hope you enjoy the sound of your Yamaha Home Theater speaker system.

YAMAHA ELECTRONICS CORPORATION, USA

6660 Orangethorpe Avenue

Buena Park, CA 90620

http://www.yamaha.com

Phone: 1-800-292-2982

©2004 Yamaha Electronics Corporation

Printed in USA

Plug In Plug in the subwoofer and receiver each into

an electrical outlet. Power on the receiver first then the
subwoofer. Adjust volume on the receiver to taste. Please
see your receiver’s owner’s manual for recommended
guidelines and settings.

Part No. 9500QCG rev4
04/04

Connect RCA Cable Connect RCA cable

to subwoofer.

Set subwoofer VOLUME control to half-way mark and POWER to
OFF. Connect RCA cable to receiver from subwoofer.

CAUTION

Subwoofer must not be plugged in while connecting it.

YST-SW030 Subwoofer

14

Advertising