ZyXEL Communications STB-1003 - Manual (Page 4)

STB-1003 Quick Start Guide
3
The STB-1003 has a variety of options for connecting your TV. Use the hardware
connections best suited to your TV. The following figure shows some examples of
connecting a TV.
2 Turn the STB-1003 On
Once you have made the hardware connections, take the following steps to start up the
STB-1003.
1 Turn your television on. Change it to the channel or setting you normally use to watch
videos or DVDs. For example, select the “VIDEO” input option, or press the “AV” button
(look at the documentation that came with your TV if you are not sure what to do).
2 Press the ON/OFF button on the rear of the STB-1003.
The light on the front of the STB-1003 lights up. It stays red while the STB-1003 is
starting up, then turns green once the STB-1003 is ready (this may take a little while).
The
light on the front of the STB-1003 turns green once the STB-1003 has finished
starting up.