M-AUDIO iControl - Manual

3
iControl
English
Introduction
Congratulations on your purchase of the M-Audio iControl for GarageBand, a control interface
designed for use with Apple’s GarageBand music software. With iControl, you will be able to
control all the various aspects of GarageBand from an intuitive control surface, maximizing your
working speed. While the operation of the iControl is very simple, we recommend that you read
once through this manual to familiarize yourself with all of the controls and functions available to
you.
What’s In the Box
Inside your iControl package, you will find:
< The iControl controller
< Printed Quick Start Guide
< Six foot USB cable
Product Features
< Eight endless rotary encoders
< Master Volume slider
< Six Transport buttons
< Select, Mute, Solo, and Record Enable buttons
< Jog wheel
< Powered from USB bus
< Fully configured—no additional setup is necessary
Minimum System Requirements
NOTE: The below requirements are necessary to obtain MIDI communication between iControl
and the computer. These requirements do not reflect the additional or higher requirements of
GarageBand software.
< GarageBand 2.0.1 or later
< Mac OS X 10.3.4 or higher
< Available USB port
About This Manual
This manual is broken down into sections to cover the various aspects of iControl. Installation is
covered first, followed by an overview of the controls. Last is an in-depth look at the operation of
iControl.
English