ZyXEL Communications ES-2048 - Manual (Page 84)

ES-2000 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
84
Password: 1234
How to change the password?
Web Configurator is the only place you can change the password. After you log
in for the first time, it is recommended you change the default administrator
password.
From Web Configurator: Click Advanced Application, Access Control, and
then Logins to display the next screen.
From there you can change a new password.
How to access the Command Line Interface?
There are two ways to access the Command Line Interface. One is “Telnet to
the switch” and another is “Connect a computer to the console port and use
the terminal emulation software.” Please check “How to access the Switch
through the console port?” to set up the parameters.
If you forget the password, how to reset the password to default?
If you forget the password, you will need to reload the factory default
configuration. Please be aware that you will lose all previous configurations.
1. Connect the console cable to your computer and open the terminal