Yamaha CRX-E300 - Manual (Page 24)

20
1
Insert the desired disc into the CD player, and load a
blank tape into the KX-E300.
2
Press CD.
3
Press R.TIME repeatedly to select the length of tape
to be used. Each time you press R.TIME, the length
of the tape changes as follows:
• You can use numeric buttons to input the length of
the tape.
4
Press PROG to start programming.
•
“A B” appears in the display to indicate the
direction of the tape.
Copy time control
By specifying the length of the tape, CRX-E300 programs
tracks or helps you to program tracks so they will fit onto
the tape with the least amount of unrecorded space
remaining at each end of the tape.
1 Manual tape programming
5
Select the desired track number using numeric
buttons.
• Repeat step 5 to continue programming tracks.
• The remaining time is shown on the display. If the
track is longer than the remaining time, “TM
Over” appears on the display.
6
Press R.TIME to continue programming tracks on
side B.
• Repeat step 5.
7
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
2 Automatic tape programming
1
Repeat steps 1 to 3 of “Manual tape programming”.
2
Press REP to start programming.
• Programming is done in the order on the CD from
side A to side B. When complete, the following
display appears.
(Example) when 11 tracks have been programmed
You can change the program data following the steps
described on page 15, “To change program data”.
3
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
To stop dubbing
Press & on KX-E300.
To cancel tape programming
Press & on CRX-E300 when dubbing is stopped.
DUBBING
START DUBBING
MODE
PROG
R.TIME
REP
POWER
1 2 3
1 2 3
4 5 6
4 5 6
7 8 9
7 8
0 +10 +100
REP RANDOM PROG
A B C
TEXT/TIME R. TIME
D E
TAPE
DIRECTION
PRESET TUNER PRESET
MD CD TAPE
AUX
MD
REC/PAUSE
TAPE
REC/PAUSE
MODE
SLEEP DISPLAY
DUBBING
VOLUME
START
90 60
46 54
CD
PROG B
SYSTEM CONTROL
0108CRXE300(UCA).18-20.E 02.5.23, 5:10 PM 20