Xantrex Technology XDC 80-75SL - Manual (Page 17)

AC Input Power
Front Panel
Release 1.0 15
Section 2. AC Input Power
WARNING
Disconnect AC power from the unit before removing the connector cover. Live line
voltages may be exposed when the cover is removed.
WARNING
A safety ground wire must be connected to the unit as shown in Figure 2.1 to ensure
operator safety.
!
CAUTION
When the power switch is turned on, output voltage or current previously set may be
applied to loads, depending on the supply configuration.
TM-XDSL-01XN.book Page 15 Tuesday, November 5, 2002 3:22 PM