ZyXEL Communications V660 - Manual (Page 104)

Chapter 13 Settings
V660 User’s Guide
104
Figure 78 Settings: WiFi
The following sections describe how to configure these screens.
"
WLAN (Wi-Fi) is the default wireless channel setting for your device. However,
GPRS starts by default if your device does not detect any Wi-Fi signal.
13.2.1 Wi-Fi Connection
Select Start > Settings > Wi-Fi > Connections. The following screen displays.
Figure 79 Settings: Connections List
Either press New to create a new wireless LAN connection profile (there does not need to be
an active access point to do this) or select Menu > Scan AP to have the V660 search for
available access points.
The V660 can store and use up to sixteen WiFi connection profiles. One connection profile is
the default, which the V660 always uses if the relevant AP is available. If the default profile’s
AP is not available, the V660 uses the profile whose AP has the strongest signal. You can
change which profile is the default by selecting Menu > Default in this screen.