ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite User Manual
User’s guide
Advertising
Table of contents
Document Outline
- Omni.Net Lite
- Copyright
- Federal Communications Commission (FCC) Interference Statement
- Safety Warnings
- ZyXEL Limited Warranty
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- 1. Introduction
- 2. Using the Utility
- 2.1 Accessing the TA with the Utility
- 2.2 Navigating the Utility
- 2.3 System
- 2.4 RS-232 Port: Local DN (Directory Number) and Call Type
- 2.5 RS-232 Port: PPP/MP Parameters
- 2.6 RS-232 Port: V.24 Signal
- 2.7 Incoming Call Screening
- 2.8 Outgoing Call Screening
- 2.9 Pre-stored Numbers
- 2.10 RS-232 Port: Advance Setting
- 2.11 Analog Port: Local DN and Options
- 2.12 Voice Calls
- 3. Using AT Commands
- 3.1 AT Commands Overview
- 3.2 Accessing the TA Example
- 3.3 AT Commands
- 3.4 Configuring Examples with AT Commands
- 3.4.1 Phone Number Assignment
- 3.4.2 Storing Phone Number
- 3.4.3 Setting Ports Priority
- 3.4.4 Disabling Call Waiting
- 3.4.5 Link Authentication
- 3.4.6 Call Bumping (Bandwidth Release) for Voice Calls
- 3.4.7 Bandwidth On Demand (BOD)
- 3.4.8 Incoming Call Screening
- 3.4.9 Outgoing Call Screening
- 3.4.10 Caller ID
- 3.5 Result Codes
- 4. Using Tone Commands
- 5. Firmware Upgrade
- 6. Troubleshooting
- Index