Yamaha EM-203VCD - Manual (Page 43)

E-35
English
Adjusting the graphic equalizer
for your desired sound taste
The 3 band graphic equalizer allows you to adjust the level
for each frequency band.
* Make adjustment by monitoring the equalizer level
indicators on the display.
1
Play back a source. (For source playback, refer to pages
18 to 33.)
2
Press the equalizer control or button once or
more to select the frequency band to which you will adjust
the level.
* The selected frequency band is shown on the display.
* The scale bar of the selected frequency band on the
graphic equalizer level indicators will flash.
3
Press the equalizer control or button once or
more to adjust the level.
* If a preset graphic equalizer mode is selected, its name
goes off from the preset equalizer mode indicator
(MUSIC) by this operation.
4
In the same way, make adjustment for other frequency
bands.
Note
When a Karaoke mode is selected, the equalizer cannot be
adjusted.
Turning the equalizer to “flat” (the
state with no equalization applied)
Press the MUSIC button and the PROGRAM button on the
front panel at the same time. The equalizer pattern is turned
to “flat” and the selection of a sound field program is
canceled.
USING GRAPHIC EQUALIZER
VIDEO CD CHANGER RECEIVER
VIDEO CD
Version 2.0 / Playback Control
PRESET/TUNING/BAND A/B/C/D/E
OPEN/CLOSE
DISC 1 DISC 2 DISC 3
DISC CHANGE
VOLUME INPUT SELECTOR
VCR•LD/TV•VCD/CD•TAPE/MD•TUNER
VCD/CD TUNER
MIC TONE MIC MIC MIXING
SOFT NORMAL MAX MIN
STANDBY/ON
PHONES
KARAOKE
PROGRAM
ECHO ECHO
MEMORY
MUSIC
DISPLAY MEMORY AUTO/MAN’L REPEAT TIME
TIME ADJ TIMER HOUR MIN
INPUT TRIM
PROGRAM MUSIC
ROCK POPS
JAZZ USER 12
PRO LOGIC HALL ARENA DISCO
3 STEREO STADIUM MONO MOVIE
100 1K 10K
3
2
MUSIC PROGRAM