Xerox VO400E - Manual (Page 36)

VIZIO VO400E User Manual
36
www.VIZIO.com
DTV / TV Input Audio Adjustment
Audio Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on
the PICTURE adjustment display.
Press the
" button to display AUDIO MODE selection.
Use the $ or # button to choose from Flat, Rock, Pop, Classic or Jazz.
Equalizer adjustments are available for you to set them to your preferred
settings. Equalizer will not be available if SRS is on.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Equalizer
Press the " button to highlight the Equalizer
selection.
Press the # button to start adjusting.
A new menu will be displayed showing volumes of
different frequencies (pitches).
Starting from lowest to the highest pitch, they are
120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz.
Press the
" button to highlight the frequency you
wish to adjust.
Use the $ or # button to adjust for boost or
attenuation. For example if you want to boost the
bass you would highlight 120Hz and turn it up.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD completely.
Balance
Press the " button to highlight the Balance selection.
Use the $ or # button to adjust the left/right balance.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
SRS TSHD
Press the " button to highlight the SRS TSHD selection.
Press the # button to select for the simulated surround sound feature to be On or Off.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.