Yamaha HTR-6060 - Manual (Page 45)

41
En
Playback
BA
S
IC
OPERA
T
ION
English
4
Press N
SET MENU on the remote control
again to exit from “SET MENU”.
■ Audio information
“---” appears when this unit cannot display the corresponding
information.
■ Video information
Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S) (see page 24).
Press 9
SLEEP (or set the operation mode
selector to K
AMP and then press MSLEEP)
repeatedly to set the amount of time.
Each time you press 9SLEEP (or MSLEEP), the front
panel display changes as shown below.
The SLEEP indicator flashes while you are switching the
amount of time for the sleep timer. Once the sleep timer is
set, the SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound field
program.
■ Canceling the sleep timer
Press 9
SLEEP (or MSLEEP) repeatedly until
“SLEEP OFF” appears in the front panel display.
The SLEEP indicator turns off, and “SLEEP OFF”
disappears from the front panel display after a few
seconds.
y
The sleep timer setting can also be canceled by pressing
GSTANDBY (or ASTANDBY/ON) to set this unit to the
standby mode.
FORMAT Signal format. When this unit cannot detect a
digital signal, it automatically switches to
analog input.
SAMPLING The number of samples per second taken from
a continuous signal to make a discrete signal.
CHANNEL The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as “3/2/0.1”.
BITRATE The number of bits passing a given point per
second.
FLAG Flag data encoded in DTS, Dolby Digital, or
PCM signals that cue this unit to automatically
switch decoders.
Note
HDMI RES. Resolution of the HDMI signals input or
output at the HDMI IN/OUT jacks of this
unit.
HDMI ERROR Error message for HDMI sources or
connected HDMI devices. See page 98
for details.
Using the sleep timer
SLEEP 120min SLEEP 90min
SLEEP 60min SLEEP 30min SLEEP OFF
SLEEP
S L E E P 1 2 0 m i n
Flashes
SLEEP
S T R A I G H T
Lights up
S L E E P O F F
Disappears