Figure 21 two separate powerline networks – ZyXEL Communications PLA470 V2 User Manual
Page 40
Chapter 4 The ENCRYPT Button
PLA-4xx Series User’s Guide
40
2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of
each other.
3 Wait for about one minute while (A) and (C) connect.
4 Check the LEDs on both (A) and (C). When the power (
) and HomePlug (
) lights
stop blinking and the power (
) light shines steadily, the devices are connected.
Figure 21 Two Separate Powerline Networks
Congratulations. You now have two separate powerline networks as shown above.
V
If the HomePlug (
) lights on both powerline devices do not light up, the
powerline devices are not connected. Repeat the connection process, making
certain you press the ENCRYPT buttons for the correct time and within two
minutes of each other. If that does not work see Section 7.5 on page 71 for
suggestions.
A
C
B