Adjusting the sound – Zoom DVD Home Theatre System User Manual
Page 19
E - 18
Adjusting the Sound
The following tables show which speakers are working in the various modes.
REMARKS:
1) Generally, only Front Left, Right speakers and Subwoofer are active at TUNER mode.
2) "
" The speakers is activated.
3) "
X
" The speakers is not activated.
4) Always keep your VCR in stereo mode otherwise the speakers output status may be different to above listed table.
5) You can only set 5.1 CH, 2.1 CH when the disc is stopped.
6) In Subwoofer On mode, if speaker is set to "Large", then the output of subwoofer is low.
To select the listening channel
1. When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different
speakers output status shown as below table.
2. At AV_IN function mode, you also can press the
PRO LOGIC button repeatedly on the remote control to
select 3 STEREO,
PRO LOGIC (indicator on the front panel will illuminate) or OFF three different speakers
output status, Details please refer to below listed table.
3. You can active or off subwoofer output by setup menu.
Note:
The wording '2.1CH' will be corresponded to the audio/sound output from Front Left and Front Right speakers
plus the Subwoofer.
5.1 CH /
2.1 CH
Subwoofer
L/R
Speaker
Front Left
Speaker
Front Right
Speaker
Center
Speaker
Subwoofer
Rear Left
Speaker
Rear Right
Speaker
Small
Large
X
Small /
DVD
Large
CD
Small /
Large
Small /
Large
Small /
Large
Small /
Large
ON
Audio Settings
Speakers Output Status
DISC
ON
MP3
OFF
5.1 CH
5.1 CH
2.1 CH
2.1 CH
N/A
N/A
OFF
ON
OFF
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3 Stereo /
Pro Logic
Subwoofer
L/R
Speaker
Front Left
Speaker
Front Right
Speaker
Center
Speaker
Subwoofer
Rear Left
Speaker
Rear Right
Speaker
TUNER
N/A
N/A
N/A
X
X
X
ON
Small
Pro
ON
Large
X
Logic
Small /
Large
ON
Small
X
X
ON
Large
X
X
X
Small /
Large
Small /
Large
Small /
Large
Sources
Audio Settings
Speakers Output Status
OFF
ON
OFF
OFF
3 Stereo
OFF
AV_IN
X
X
X
X
X
X
X
X
X
X
X