Zonet Technology Zonet ZEW1630 - Manual (Page 14)

wireless mode field will be available for setup in ad-hoc mode
5. TX Power: Transmit power, the amount of power used by a radio transceiver to send the
signal out. User can choose power value by pull down menu
6. Preamble: Under Ad-hoc mode, user can choose Auto, Long, or Short by pull down menu
7. Ad hoc wireless mode: Will be available for set up in Ad-hoc mode by pull down menu
8. RTS Threshold: User can adjust the RTS threshold number by pull down menu or key in
the value directly. The default value is 2347
Fragment Threshold: User can adjust the FRG threshold number by sliding the bar or
key in the value directly. The default value is 2346
9. Channel: Will be available for set up in Ad-hoc mode by pull down menu
b. Authentication & Security
3.4 Statistics
Statistics page shows the detail counter information based on 802.11 MIB counters. This page
translates MIB counters into a format easier for user to understand. Figure 3-5 shows the detail
page layout.
Figure 3-5
1. Transmit Statistics:
a. Frames Transmitted Successfully
b. Frames Transmitted Successfully Without Retry
c. Frames Transmitted Successfully After Retry(s)
d. Frames Fail To Receive ACK After All Retries
e. RTS Frames Successfully Receive CTS
f. RTS Frames Fail To Receive CTS
2. Receive Statistics:
a. Frames Received Successfully
b. Frames Received With CRC Error
c. Frames Dropped Due To Out-of-Resource
d. Duplicate Frames Received
3. Reset counters to zero
14