Zanussi DX 6451 - Manual (Page 5)

Function buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- the setting of the water softener,
- deactivation/activation of the rinse aid dispenser,
- the cancelling of a programme in progress.
Programme selection buttons: the selection of a
washing programme occurs by pressing one of these buttons
(see "Washing programmes" chart).
Half load button: this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this option, the prewash phase is
automatically excluded with programmes Intensive 70°C and
Normal 65°C.
(In this case the detergent dose for the prewash
phase is no longer necessary).
The duration of the washing phase with programme Bio 50°C
will be reduced.
With programme Rinse and Hold it is not possible to select
the half load option (Button deactivated - indicator light off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
Indicator lights: have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
Phase indicator lights: have the following meanings:
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
5
The control panel
Function buttons
Programme selection
buttons
Indicator lights
Half load button
Door handle
On/Off indicator light
On/Off button
Salt refilling indicator light: illuminates when the salt
has run out.
Rinse aid refilling indicator light: illuminates when
the rinse aid has run out.
WASH: illuminates when the washing and rinsing phases
are running.
DRY: illuminates when the drying phase is running.
END: illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
- the setting of the water softener,
- deactivation/activation of the rinse aid dispenser,
- intervention of an alarm due to the malfunction of the
machine.