Yamaha AX-1090 - Manual (Page 8)

8
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If the
CD player, tuner, tape deck and turntable connected to this unit are YAMAHA components designed for remote control compatibility,
then this remote control transmitter will also control various functions of each component.
For Control of This Unit
1
Input selector keys
Selects input source.
2
MUTING key
When pressed, decreases the volume level by 20 dB. To
resume original volume level, press this again.
While muting, the indicator on the VOLUME control flashes on
and off continuously.
3
VOLUME +/– keys
Turns the volume level up/down.
4
POWER key
Turns the power on/off.
*
While the power is on, pressing the POWER key on the
remote control transmitter switches the unit from the
power-on mode to the standby mode, and vice versa. (In
the standby mode, the power indicator on the front panel is
half illuminated.)
For Other Component Control
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their functions
will be the same. On each key function, refer to the
corresponding instruction on your component’s manual.
1
Tape deck keys
Controls tape deck.
*
DIR A, B and A/B are applicable only to double
cassette tape deck.
*
For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
Tuner keys
Controls tuner.
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E:
Selects the group (A – E) of preset station
numbers.
3
CD player keys
Controls compact disc player.
*
DISC is applicable only to compact disc changer.
4
Turntable key
Starts/stops record play on turntable.
1
3
1
2
3
2
4
YAMAHA HIFI SYSTEM
REMOTE CONTROL TRANSMITTER
TAPE 2 REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
AUX
PRESET A/B/C/D/E – +
MUTING
TAPE 1 A/B
TUNER
CD
PHONO
TAPE 3
PLAY
/CUT
4