Yamaha AX-10 - Manual (Page 12)

12
SPECIFICATIONS
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.03% THD ...................70W+70W
6 ohms, 20 Hz to 20 kHz, 0.06% THD ...................80W+80W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
8/6/4/2 ohms.............................................95/117/140/200W
DIN Standard Output Power per Channel
(4 ohms, 1 kHz, 0.7% THD)
[Europe model only]....................................................100W
IEC Power (8 ohms, 1 kHz, 0.03% THD)
[Europe model only]......................................................77W
Power Band Width
8 ohms, 35W, 0.03% THD..........................10 Hz to 40 kHz
Damping Factor
8 ohms, 20 Hz–20 kHz...................................................150
Input Sensitivity/Impedance
PHONO MM............................................2.5 mV/47 k-ohms
CD/TUNER/TAPE/AUX ...........................150 mV/47 k-ohms
MAIN IN ......................................................1.0V/10 k-ohms
Maximum Input Signal (1 kHz, 0.005% THD)
PHONO MM .............................................................120 mV
Output Level/Impedance
REC OUT ..............................................150 mV/2.6 k-ohms
PRE OUT....................................................1.0V/1.5 k-ohms
Headphone Jack Rated Output/ Impedance
Output Level (8 ohms, 1 kHz, 0.03% THD) .................0.47V
Impedance ............................................................390 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/TAPE/AUX...........................................0±0.5 dB
MAIN IN .................................................................0±0.5 dB
RIAA Equalization Deviation (20 Hz to 20 kHz)
PHONO MM ..........................................................0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT (3V) ................................0.005%
CD/TUNER/TAPE/AUX to PRE OUT (1V) ................0.008%
CD/TUNER/TAPE/AUX to SP OUT (35W/8 ohms)....0.025%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted)............................. 88 dB
CD (PURE DIRECT: ON)........................................... 110 dB
Residual Noise (IHF-A Network)
CD (PURE DIRECT: ON)............................................. 50
µ
V
Channel Separation (Vol. –30 dB)
PHONO MM/MC (Input Shorted 1 kHz/10 kHz)63 dB/52 dB
CD/TUNER/TAPE/AUX (Input 5.1 k-ohms Terminated
1 kHz/10 kHz) ...................................................65 dB/50 dB
Tone Control Characteristics
BASS: Boost/cut ..........................................±10 dB (20 Hz)
TREBLE: Boost/cut ....................................±10 dB (20 kHz)
Gain Tracking Error (0 – –60dB)........................................3 dB
Power Supply
[U.K. model] ................................................AC 240V, 50 Hz
[Europe model]............................................AC 230V, 50 Hz
[General model] ................AC 110/120/220/240V, 50/60 Hz
Power Consumption ........................................................170W
AC Outlets
SWITCHED OUTLETS ...............................100W max. total
Dimensions (W x H x D) .....................280 x 118.5 x 388.5 mm
(11” x 4-11/16” x 15-5/16”)
Weight ......................................................8.2 kg (18 lbs. 1 oz.)
Accessories ....................................Remote control transmitter
Batteries
Specifications subject to change without notice.