Yamaha DGX-202 - Manual (Page 69)

MIDI Functions
69
This function lets you enable or disable keyboard control over the DGX-202’s
voices in the
Function mode (page 76) . This would come in handy, for example,
when recording notes to MIDI sequencer. If you are using the sequencer to play
back the voices of the DGX-202, you would want to set this to “off” — in order to
avoid getting “double” notes, both from the keyboard and from the sequencer.
Normally, when playing the DGX-202 by itself, this should be set to “on.”
The most common use for the Initial Setup Send function is in recording a song
on a sequencer that is intended for playback with the DGX-202. Essentially, this
takes a “snapshot” of the DGX-202 settings and sends that data to the sequencer.
By recording this “snapshot” at the start of the song (before any actual perfor-
mance data), you can instantly restore the necessary settings on the DGX-202 in
the
Function mode (page 76) . Provided there is a pause in the song, you could
also do this in the middle of a song — for example, completely changing the
DGX-202 settings for the next section of the song.
This determines whether the style and song playback functions are controlled by
the DGX-202’s internal clock (off) or by MIDI clock data from an external
sequencer or computer (on).
This should be set to on when you want to have style or song playback follow the
external device (such as a rhythm machine or a sequencer). The default setting is
off.
These settings can be made in the Function mode (page 76).
This lets you save important DGX-202 data and settings to another device (such
as a sequencer, computer, or MIDI data filer).
These settings can be made in the Function mode (page 76).
●
Bulk Data Receive
Send the Bulk Data from computer or sequencer to the DGX-202.
Local Control
• No sound is output from the
DGX-202 when Local ON/OFF
is set to OFF.
Using Initial Setup Send with a Sequencer
• When the Initial Setup Send
operation is completed, the DGX-
202 automatically returns to the
previous panel condition.
External Clock
• If External Clock is set to ON,
style, song or M.D.B. playback
will not start unless external
clock are received.
Bulk Data Send
• Keep in mind that all recorded
Song data and One Touch Set-
ting data operations replace
the data.